CarPro – Gliss v2 Hyper Slick Top Coating is a Hyper Slick Top Coating or stand alone product that is incredibly easy to use and gives a smooth, glossy & extremely hydrophobic finish to any paint surface.
CarPro – Gliss v2 Hyper Slick Top Coating utilises new advances in nanotechnology and has designed an all-new hyper-smooth, hyper-glossy and easy to apply ceramic nano coating that excels as a top-coat for all CarPro Cquartz coatings.
CarPro GLISS also increases resistance to static buildup, dust retention and many types of mineral and water stains! Combining modified long-chain carbon fluorine polymers and enhanced nano-technology, CarPro Gliss is an evolution in top-coat protection and its immensely tactile feel, achievable on any non porous surface. This next generation coating eventhough works well as a top coating over existing coatings, when used on it’s own offers in excess of 12 months protection.
This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!
1 x 30ml or 50ml bottle of CQuartz GLISS (20ml+/- per coat)
1 x Applicator Block
4 x 4″ Microfiber Suede Applicators
Hyper SLICK and smooth
Next Generation Top Coat!
Also works great as a stand-alone Nano-coat!
Anti-static: Non-oily / resists dust retention
Adds thickness to your existing coat when used as a top coat
Enhances resistance to water spots and mineral stains
Extreme Hydrophobic effect
Enhances Gloss and life of any ceramic coating
Durability: 12+ Months
Coverage: 20ml per coat +/-
Water contact angle: 115°
Recommended working temperatures: 5c – 30c
Directions: (For use as primary coat)
Wash with Reset, decontaminate, and polish with a CarPro abrasive polish
Wipe down with CarPro Eraser (vehicle must be 100% dry and free of moisture or dew.)
Drag two lines of product across length of suede wrapped applicator.
Apply evenly across surface, approximately 2 ft x 2 ft section at a time.
Add more product to applicator as needed to keep a wet, even application.
CarPro Gliss will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If haze is left on too long then reapply and immediately wipe off.
If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately.
Total cure time: 12 hours.
Directions: (For use as top coat)
May be applied 4 hours or longer after CQuartz.
If IR cured may be applied after 45 minutes from CQuartz application